Cleaning The Mist Filter - MIMAKI UJF-3042 MkII Original Instructions Manual

9
Clean the cap rubber.
• Wipe off the ink sticking to the cap rubber with a
cleaning swab dipped in maintenance solution for
maintenance.
• Wipe off so that maintenance solution for
maintenance will not remain.
• Wipe off so that no ink or cleaning solution
remains on the rim of the cap rubber.If ink
remains, nozzle missing or mixed color may occur.
Cap rubber
10
Press the
11
Close the maintenance cover then press
the key.
• After its initial operation, the machine returns to
step1.

Cleaning the mist filter

1
Press the
2
Press to select "MAINTENANCE",
and press the
• MAINTENANCE MENU will be displayed.
3
Press the
• "STATION" will be selected.
4
Press the
• "CARRIGE OUT" will be selected and the carriage
will move.
key after the cleaning.
(MENU) in LOCAL.
key.
key.
key.
5
Open the left maintenance cover.
6
Remove the mist filter.
• Mist filters are located in two places.
• To remove the mist filter, pull the knob to the front
while pushing the hook in the direction indicated
by the arrow.
Hook
Knob
Knob
7
Clean the filter.
• Remove the filter, and remove the stain by holding
paper towel or the like.
• Wipe off any stain adhering to the filter case.
• If the stain strongly attached to the filter, such as
the liquefaction of the ink attached to the filter,
please replace the filter (SPC-0819). (
8
Set the mist filter at the original position.
9
Close the maintenance cover, and press
the key.
• After its initial operation, the machine returns to
LOCAL.
Chapter 4 Maintenance
Hook
P.4-17)
4-7
1
2
2
4
5
6