Safety Instructions - Furuno PG-700 Operator's Manual

SAFETY INSTRUCTIONS

Read these safety instructions before you operate the equipment.
WARNING
CAUTION
Warning, Caution
Instructions for the installer
WARNING
Turn off the power at the mains switch-
board before beginning the installation.
Post a sign near the power switch
indicating it should not be turned while
the equipment is being installed.
Fire, electrical shock or serious injury can
result if the power is left on or is applied
while the equipment is being installed.
Use specified cable to connect the
Junction Box.
Use of the wrong cable can result in
bodily injury and cause fire.
CAUTION
Be sure to connect to the correct
power supply.
Connection to a wrong power supply
can cause fire or bodily injury.
Observer the following compass safe
distances to prevent interference to
a magentic compass.
Std. Compass
0.3 m
Before doing deviation correction
and heading adjustment, turn off
the autopilot.
The rudder may jerk violently, which
can result in a dangerous situation.
Indicates a condition that can cause death or serious injury if
not avoided.
Indicates a condition that can cause minor or moderate injury if
not avoided.
Prohibitive Action
Steering compass
0.3 m
ii
Instructions for the user
WARNING
Turn off power at the switchboard if the
equipment is emitting smoke or fire.
Fire or electrical shock can result if the
power remains on
Turn off the power at the switchboard
if you feel the equipment is not
working properly.
If the equipment feels hot or is emitting
odd noises, immediately turn off the power
at the switchboard.
Do not dissassemble or modify the
equipment.
Fire, electrical shock or bodily injury
can result.
Mandatory Action