Furuno DRS4DL Install Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Accessories
  5. DRS4DL
  6. Install manual
Furuno DRS4DL Install Manual

Furuno DRS4DL Install Manual

Radar sensor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation Manual
RADAR SENSOR
DRS4DL
Model
SAFETY INFORMATION.................................................................................................. i
SYSTEM CONFIGURATION .......................................................................................... iii
EQUIPMENT LISTS........................................................................................................ iv
1. INSTALLATION.......................................................................................................... 1
1.1 Installation Considerations....................................................................................................1
1.2 Installation of the Radar Sensor............................................................................................2
2. WIRING....................................................................................................................... 7
2.1 Connections ..........................................................................................................................7
2.2 Check Points After Installation ..............................................................................................7
3. MAINTENANCE, TROUBLE- SHOOTING................................................................. 9
3.1 Maintenance .........................................................................................................................9
3.2 Replacement of Fuse............................................................................................................9
3.3 Troubleshooting ..................................................................................................................10
3.4 Replacement of Magnetron.................................................................................................10
SPECIFICATIONS ..................................................................................................... SP-1
PACKING LISTS ......................................................................................................... A-1
OUTLINE DRAWING ................................................................................................... D-1
INTERCONNECTION DIAGRAM ................................................................................ S-1
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.

Advertisement

Table of Contents
loading

Related Manuals for Furuno DRS4DL

Summary of Contents for Furuno DRS4DL

  • Page 1: Table Of Contents

    Installation Manual RADAR SENSOR DRS4DL Model SAFETY INFORMATION....................i SYSTEM CONFIGURATION ..................iii EQUIPMENT LISTS......................iv 1. INSTALLATION......................1 1.1 Installation Considerations....................1 1.2 Installation of the Radar Sensor....................2 2. WIRING........................7 2.1 Connections ..........................7 2.2 Check Points After Installation ....................7 3.

  • Page 2: Safety Information

    SAFETY INFORMATION Read these safety instructions before installing or operating the equipment. Indicates a potentially hazardous situation WARNING which, if not avoided, can result in serious injury or death. Indicates a potentially hazardous situation CAUTION which, if not avoided, can result in minor or moderate injury.
  • Page 3 (circuit breaker, etc.) to control the power. WARNING LABEL A warning label is attached to the sensor. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer about replacement. Name: Warning Label (2)

  • Page 4: System Configuration

    - Name: FURUNO EUROPE B.V. - Address: Ridderhaven 19B, 2984 BT Ridderkerk, The Netherlands Program No. • 0359338-01.** ** denotes minor modifications. CE declaration With regards to CE declarations, please refer to our website (www.furuno.com), for further infor- mation about RoHS conformity declarations.

  • Page 5: Equipment Lists

    EQUIPMENT LISTS Standard supply Name Type Code No. Remarks Radar Sensor RSB-127-104 000-027-200 Installation Materials CP03-35701 001-265-920 CP03-36400 000-027-211 Select Power/LAN cable 10 m CP03-36410 000-027-212 Power/LAN cable 15 m CP03-36420 000-027-213 Power/LAN cable 20 m CP03-36430 000-027-214 Power/LAN cable 30 m Spare Parts SP03-17901 001-351-470...

  • Page 6: Installation

    INSTALLATION Installation Considerations General considerations NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. • The radar sensor has no power switch. Therefore, it is recommended that you con- nect the sensor to a distribution switchboard with a switch for power control.

  • Page 7: Installation Of The Radar Sensor

    1. INSTALLATION • It is rarely possible to place the radar sensor where a completely clear view in all directions is available. Thus, you should determine the angular width and relative bearing of any shadow sectors for their influence on the radar at the first opportunity after fitting.
  • Page 8 1. INSTALLATION Installation on a platform Follow the instructions below to install the sensor on a platform. STERN Align bow mark (Δ) on radome Power/LAN cable (1 m) with ship’s bow. Platform Drill holes referring to the outline drawing Flat washer and the mounting template.
  • Page 9 1. INSTALLATION 1. Remove four each of hex bolts (M10 20), flat washers and spring washers pre- attached to the bottom of the radar sensor. Flat washer Spring washer ×4 Hex bolt (M10×20) 2. Using the template supplied, construct a platform and drill mounting holes in the platform to fasten the sensor.
  • Page 10 1. INSTALLATION • The cable must be fixed so no tension is applied to the connectors. To prevent tension, create a loop in the cable close to the sensor and tie the loop with cable ties, as in the figure below. Loop cable and tie loop with cable ties.
  • Page 11 1. INSTALLATION How to fasten the bracket to the mast 1. Drill eight holes of 6.5 mm diameter in the mast and fix the bracket with eight stain- less steel rivets (local supply) of 6.4 mm diameter. 2. Tighten the bolts on the bracket. 3.

  • Page 12: Wiring

    2.1.1 Power Requirement The DRS4DL requires either 12 VDC or 24 VDC power. The 10/15/20 m cables are for 12 or 24 VDC, and the 30 m cable is for 24 VDC only. Connect the red cable to the positive terminal of ship’s battery; the blue cable to the negative terminal. The black cable is a shielding cable for grounding.
  • Page 13 2. Take the appropriate action on your multi function display device to turn on the DRS4DL. 3. If necessary, adjust the brightness and change the language on the multi function display device.

  • Page 14: Maintenance, Trouble- Shooting

    MAINTENANCE, TROUBLE- SHOOTING WARNING DO NOT OPEN THE SENSOR. Electrical shock hazard There are no user-serviceable parts inside. Only qualified personnel are allowed to work inside the equipment. Maintenance Regular maintenance is important for good performance. Check the points mentioned below every 3 to 6 months to keep the radar sensor in good working order.

  • Page 15: Troubleshooting

    3. MAINTENANCE, TROUBLE- SHOOTING Troubleshooting The table below provides simple troubleshooting procedures to restore normal opera- tion. If you cannot restore normal operation, contact your dealer for advice. Trouble Remedy The power cannot be turned on. • Check if the power/LAN cable is connected to the power source and the power source is on.

  • Page 16: Specifications

    FURUNO DRS4DL SPECIFICATIONS OF RADAR SENSOR DRS4DL RADIATOR Antenna type Patch array antenna Antenna length 19-inch Horizontal beam width 5.2° typical (3 dB) Vertical beam width 25° (3 dB) Sidelobe attenuation -20 dB (within ±20°), -25 dB (±20° or more)
  • Page 17 C3637-Z01-B...
  • Page 21 When a claim is made, FURUNO has a right to choose whether with other electronic devices. The imported product may also be to repair the product or replace it.
  • Page 22 24 months from installation date provided the work is done by Furuno U.S.A., Inc. or an AUTHORIZED Furuno dealer during normal shop hours and within a radius of 50 miles of the shop location.

  • Page 23: Declaration Of Conformity

    Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: Spanish Por la presente, Furuno Electric Co., Ltd. declara que el tipo de equipo radioeléctrico arriba mencionado es conforme con la Directiva 2014/53/UE. (ES) El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:...
  • Page 24 Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: Maltese B'dan, Furuno Electric Co., Ltd., niddikjara li msemmija hawn fuq-tip ta' tag mir tar-radju huwa konformi mad-Direttiva 2014/53/UE. (MT) It-test kollu tad-dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz...
  • Page 28 7KH SDSHU XVHG LQ WKLV PDQXDO LV HOHPHQWDO FKORULQH IUHH )85812 $XWKRUL]HG 'LVWULEXWRU'HDOHU  $VKLKDUDFKR 1LVKLQRPL\D  -$3$1 $  )(%  3ULQWHG LQ -DSDQ $OO ULJKWV UHVHUYHG $  2&7    3XE 1R ,0($ 7$68 '56'/           ...

Table of Contents