Cleaning The Filter - Gtech Multi K9 ATF011 Operating Manual

Cleaning the filter

Remove the filter by pulling it from the top
of the bin. Tap the dirt from the filter and tip
any dirt from the filter housing. Wash the
filter if necessary.
Wash the filter under a tap, squeeze it out
then let it dry completely before using it.
Use your spare filter while it dries.
(You can get more at www.gtech.co.uk)
Never operate the Multi K9 without the
filter inside the bin. You could damage
the motor.
Before washing the filter, you will need to
remove the scented cartridge by pulling it
out from the scented cartridge housing at
the top of the filter.
Ensure tab is refitted on to filter before
using.
9