Cleaning The Filter - Gtech MULTI ATF001 Operating Manual

Table of Contents

Advertisement

Empty the bin regularly, especially
if the filter light comes on.
There's no latch, the bin just pulls off.
It's easier if you wiggle it as you pull it.

Cleaning the filter

If the filter light comes on when the bin is
not full, wash the filter. the filter is inside
the green filter case which just pulls out
of the Multi's bin.
Multi Manual v6.indd 7
Hold the Multi's bin over your rubbish bin and
release the latch to empty the dirt. Check the
holes on the green filter case aren't blocked
and remove any dirt stuck to it.
When placing the
filter back into the bin,
make sure the word
top is at the top of the
bin, and the hole is at
the bottom.
Wash the filter under a tap, squeeze it out
then let it dry completely before using it.
(You can get a spare filter at
www.gtechonline.co.uk)
Tip: Never put the bin back without
the filter inside. You could damage
the motor.
7
03/09/2013 10:15

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTI ATF001 and is the answer not in the manual?

Table of Contents

Save PDF