Care & Cleaning - Breville Hemisphere Twist Instruction Book

Care & Cleaning
JUG and lid
To avoid food drying on the blades and jug,
follow the below steps as soon as possible
after use:
• Rinse most of the ingredients off the jug
and lid.
• Add 500ml of warm water and press the
AUTO CLEAN button. If thick or sticky
ingredients require extra cleaning power add
a few drops of dish liquid detergent.
• Rinse the jug and lid again and/or
wash separately in warm soapy water
with a soft cloth or bottle brush.
• Take care to rinse all detergent
off the jug after cleaning.
• It is most effective to clean the
jug immediately after use.
citrUs
Exposure to citrus oil may affect the clarity
and longevity of the blending jug. After
washing in detergent, rinse with plain water
thoroughly, and allow to dry immediately.
Do not soak.
motor Base
To clean the motor base, wipe with a soft,
damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
cleaninG aGents
Do not use abrasive scouring pads or
cleaners on either the motor base or the jug,
as they may scratch the surface. Use only
warm soapy water with a soft cloth.
disHWasHer
The blender jug and lid can be washed in
the dishwasher on a standard wash cycle.
Jug can be placed on the bottom shelf,
however the lid and inner measuring cap
should be washed on the top shelf only.
The citrus cone may be occasionally
washed in the dishwasher (top shelf only)
however washing in the dishwasher is
not recommended on a regular basis as
prolonged exposure to harsh detergents and
high heat may shorten the life of the plastic.
stUBBorn food stains
and odors
Strong smelling foods such as garlic and
fish, and some vegetables such as carrots,
may leave an odor or stain. To remove, clean
the jug and lid using the AUTO CLEAN
instructions. Add 2 tablespoons bicarbonate
of soda and ½ cup (125ml) vinegar into jug
and let the mixture froth for 1 minute. Scrub
the jug and lid with the mixture using a soft
dishwashing brush. Add 2 cups warm water
and allow to stand for 5 minutes. Attach jug
to blender base. Secure lid and then press
the AUTO CLEAN button. Thoroughly rinse
the jug, and allow to air dry. Store jug and lid
with the lid off to allow air to circulate.
storaGe
Store your blender upright with the blender
jug assembled on the motor base, or beside
it. Do not place anything on top. To allow air
to circulate, keep the lid off.
13