Figure A.1 Example Of Rack Mounting - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

APPENDIX A Racks
Rack mounting requirements
The following table lists the requirements for mounting in one rack.
Model
PRIMEQUEST 2000 series
PCI_Box
(*1) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A,
the bottom of the mounted device must not be below 2U.
(*2) For the models 2742/2737/2724/2642/2624/2616 and PCR M1 742S/724S/642S/624S/616S/742A/724A,
the top of the mounted device is 22U (1,020 mm).
For details, contact the distributor where you purchased your product, or your sales representative.
Number of
mountable units
3
No mounting requirements

FIGURE A.1 Example of rack mounting

Number
(1) Example 1 of rack mounting for model 2642
(2) Example 2 of rack mounting for model 2642
(3) 1,022 mm
(4) 1,060 mm
Mounting area
The bottom of the mounted device must not be
below 1U. (*1)
The top of the mounted device must not be above
1,066 mm from floor. (*2).
Description
57 CA92344-0535-06