Advertisement
Problem
Fuse at battery blown or
not installed
Power LED
not 'ON
Improper connections
Fuse blown
Amplifier too hot
Status LED
Speaker wires shorted
'ON'
Internal malfunction
Cause
Replace with correct type and rated fuse.
Check that the ground wire, power wire and the
remote wires are connected to the correct terminal
Replace with correct type and rated fuse.
Move the amplifier into a more ventilated area
Check that there are no speaker wires shorted to any
other wire and also check if any wire is shorted to ground
Disconnect all wires except ground, power and remote.
Then turn the amplifier 'ON', if the protection light is still
'ON' then return for service
Solution
Advertisement
