MSA
3.3
Startup
The product recognises an attached WirelessUSB module automatically. During
the power-up sequence, the product will pair automatically with the last connected
product.
To pair two products, the pairing mode must be activated for all
products. Otherwise no partner can be found.
Fig. 4
Display with antenna symbol
The strength bars in the status bar of the colour display are used for displaying the
availability of a WirelessUSB module. During the startup sequence the product tries
to pair with the last partner. The strength bars are blinking. After the Fresh Air Setup
[FAS] the antenna symbol will be displayed.
GB
ALTAIR 5/ALTAIR 5X WirelessUSB
Operation
9