MSA Altair 5 Directions

Gas meter

Hide thumbs Also See for Altair 5:

DIRECTIONS FOR THE 4 MINUTE CHECK

For the Safety event at the OWEA Operations Challenge we will be using an MSA Altair 5 Gas Meter. If you

have any questions about the meter you may contact Ed Nutter, Safety Event Coordinator at

enutter@newarkohio.net

or 740.670.7950

a. Attach hose to the BACK and top of the meter (hose attaches using a quick connect fitting)

Connect hose

here

b. Press and HOLD the middle button until "MSA" appears on screen

On/off button

c. Verbalize "GAS METER ON"

Table of Contents

Do you have a question about the Altair 5 and is the answer not in the manual?

Page 1 DIRECTIONS FOR THE 4 MINUTE CHECK For the Safety event at the OWEA Operations Challenge we will be using an MSA Altair 5 Gas Meter. If you have any questions about the meter you may contact Ed Nutter, Safety Event Coordinator at enutter@newarkohio.net...
Page 2 d. Allow unit to finish power on self-test e. When screen reads “PUMP TEST” use your thumb to block the end of the hose and verbalize “BLOCKING PUMP”. f. When screen reads “PUMP TEST PASS” unblock pump and verbalize “PUMP CLEAR”...