Operation; Measurement Mode [Normal Operation] - MSA ALTAIR 5X Operating Manual

MSA
3

Operation

3.1

Measurement Mode [Normal Operation]

The following options pages can be executed from the Normal Operation screen:
BUMP page
[ALTAIR 5X only]
Peak Page*
Min Page
STEL Page*
TWA Page
Date Page
Last Cal Date
Cal Due*
Motion Alert
Wireless
* The display of these pages can be de-activated through MSA Link software
Using the three instrument buttons, the user can navigate through each sub-menu
in a top/down sequence.
Refer to the Operating Manual of ALTAIR 5/ALTAIR 5X and additional information
in chapter 5 [appendix] for detailed instructions on navigating through these
screens.
GB
This page allows user to perform a Bump Test on in-
stalled sensors
This page shows the peak readings for all sensors.
This page shows the minimum readings for the oxy-
gen sensor.
This page shows the calculated STEL readings of the
instrument.
This page shows the calculated TWA readings of the
instrument.
This page shows actual date settings of the instru-
ment.
This page shows the date of the last calibration.
This page shows the set date for the next calibration.
This page allows the Motion Alert Feature to be acti-
vated or deactivated.
This page allows the Wireless communication to be
activated or deactivated.
ALTAIR 5/ALTAIR 5X WirelessUSB
Operation
7