To clean or replace grease filter:
Push in at the indicated area to open the
1.
vent grille. The vent grille will hinge down for
access to the grease filters.
PUSH TO OPEN
.
To remove or install the grease filters push tab
towards the back of the unit.
.
To clean grease filter, soak the filters in hot water using
a mild detergent. Rinse well and shake to dry.
NOTE
Do not use ammonia. The aluminum on the
grease filter will corrode and darken.
NOTE
The grease filter is dishwasher safe.
To avoid grease filter damage while cleaning,
place filter into the dishwasher top rack for
cleaning
.
RANGE HOOD CARE
Replacing the Front LED lights
1. Remove the vent grille and grease filters.
2. Remove the screws at the front support
and slide the panel back.
3. Disconnect the front LED lights wiring
4.
Squeeze LED lamp mounting clips and push
down the LED lights as shown below
5. Replace with new LED lights
and re-install the front support
Squeeze here
Squeeze here
P art number 5304503879
EN-1