Slide Control Manual; (Loop Handle) - Stihl FS 25-4 User Manual

•
Pull throttle trigger (1) with
throttle cable (2) off the peg.
•
Disconnect throttle cable from
trigger.
•
Lift contact spring (1) a little and
remove the throttle cable (2).
28
•
Pull interlock lever with contact
spring off the peg.
•
Remove contact spring from
interlock lever.
Assemble in the reverse
sequence.
•
Check positions of throttle cable
(1), contact spring (2), protective
tube (3) and insulator (4).
- Tighten screws to 1.0 Nm.
9.4 Slide Control

(Loop Handle)

- Remove the interlock lever
- see 9.3.
•
Pull slide control off the handle
molding.
•
Remove screws from clamps.
- Take handle molding off the dri-
ve tube.
•
Remove torsion spring from peg.
FS 25-4, 65-4