Table Of Contents; Kombisystem; Guide To Using This Manual - Stihl FCB-KM User Instructions

English
Contents
1 KombiSystem..............................................2
2 Guide to Using this Manual.........................2
3 Safety Precautions and Working Techni-
ques............................................................ 2
4 Using the Unit............................................. 6
5 Approved KombiEngines............................ 8
6 Assembling the Unit.................................... 9
7 Mounting the KombiTool............................. 9
8 Mounting the Cutting Blade.......................10
9 Starting / Stopping the Engine.................. 10
10 Storing the Machine.................................. 11
11 Replacing the Depth Wheel...................... 11
12 Replacing the Skirt....................................12
13 Replacing the Cutting Blade..................... 12
14 Checking and Replacing the Wear Guard 13
15 Maintenance and Care..............................13
16 Minimize Wear and Avoid Damage...........14
17 Main Parts.................................................14
18 Specifications............................................14
19 Maintenance and Repairs......................... 16
20 Disposal.................................................... 16
21 EC Declaration of Conformity................... 16
22 UKCA Declaration of Conformity.............. 16
1

KombiSystem

In the STIHL KombiSystem a number of different
KombiEngines and KombiTools can be com-
bined to produce a power tool. In this instruction
manual the functional unit formed by the Kom-
biEngine and KombiTool is referred to as the
power tool.
Therefore, the separate instruction manuals for
the KombiEngine and KombiTool should be used
together for the power tool.
Always read and and make sure you understand
both instruction manuals before using your
power tool for the first time and keep them in a
safe place for future reference.
2

Guide to Using this Manual

2.1 Pictograms
All the pictograms attached to the machine are
shown and explained in this manual.
2
2.2 Symbols in text
WARNING
Warning where there is a risk of an accident or
personal injury or serious damage to property.
NOTICE
Caution where there is a risk of damaging the
machine or its individual components.
2.3 Engineering improvements
STIHL's philosophy is to continually improve all
of its products. For this reason we may modify
the design, engineering and appearance of our
products periodically.
Therefore, some changes, modifications and
improvements may not be covered in this man-
ual.
3 Safety Precautions and
Working Techniques
Special safety precautions must be
observed when working with this
edger because it has a sharp cutting
blade that rotates at very high speed.
Read both User Manuals (KombiEn-
gines and KombiTools) carefully
before using the unit for the first time
and keep them in a safe place for
future reference. Non-compliance
with the User Manuals may cause
serious or even fatal injury.
The power tool should only be provided or
loaned to people familiar with this model and its
operation. The User Manurals for KombiEngines
and KombiTools should always be handed over
with the machine.
The edger may only be used to cut borders along
paths, flower beds and lawns.
The machine must not be used for any other pur-
poses - risk of accident!
Only use blades or accessories which have been
approved by STIHL for this machine or which are
technically equivalent. If you have any questions
about this, consult your dealer.
Use only high-quality parts and accessories. in
order to avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of genuine STIHL
tools and accessories. They are specifically
0458-471-0121-C