Jenn-Air CCG2422 Use And Care Manual page 9

Check the following list to be sure a servicecall is really necessary.
If surface burner falls to light:
• check to be sure unit is properly connectedto power supply.
• check for a blowncircuitfuse or a trippedmain circuitbreaker.
• checkto be sure burneris correctlyratedfor your type of gas.
• check to be sure burnerportsor ignitionports are not clogged.
• checkto be sure igniteris clicking. If igniterdoesn'tclick,turn controlknobOFF.
• check to be sure the burner head is correctly seated on the burner base,
If the flame is uneven:
• burnerports may be clogged.
• flame setting may need to be adjusted.
If surface burner flame lifts off the ports:
• contact an authorizedJenn-Air Service Contractor.
If surface burner flame is yellow in color:
• contact an authorizedJenn-AirService Contractor.