Table of Contents
Advertisement
To change the function you adjust
1
Change settings in advance so that you can select more than two functions.
≥ Change settings as follows:
Functions
Gain adjustment
White balance
Shutter speed
Area Mode
Focus Assist
Headphone Volume Adjustment Connect headphones to this unit.
≥ The on-screen icon for the selected function is displayed in white. (Function Execution Mode)
If you have selected [
2
Push the jog dial.
≥ The on-screen icon turns yellow. (Function Selection Mode)
3
Rotate the jog dial to select the function you want to adjust, and press the jog
dial to set the selection.
≥ The on-screen icon for the selected function turns white. (Function Execution Mode)
≥ You can rotate the jog dial to adjust the setting of the selected function.
∫ Headphone Volume Adjustment
Adjust the volume of the headphone while recording.
≥ Set [VOLUME] to [ON].
1
Connect headphones to the headphone
terminal.
2
Rotate the jog dial to adjust the volume.
≥ Actual volume to be recorded does not change.
3
Push the jog dial to
≥ You can also adjust the volume by touching
after the adjustment allows you to exit the setting.
Press the GAIN button to switch to Manual Gain Mode.
(l
55)
Press the WHITE BAL button to switch to the Manual White
Balance Mode
Press the SHUTTER button to enable Manual Shutter Mode.
(l
57)
Press the applicable USER button to enable Area Mode.
Set [FOCUS ASSIST 1] or [FOCUS ASSIST 2] to [EXPAND]
or [BOTH]* and press the applicable USER button to set
Focus Assist to ON.
* This item is only set in [FOCUS ASSIST 1].
ICONS], you can rotate the jog dial to select an operation icon.
(l
129)
finish the adjustment
- 84 -
Settings to be changed in advance
(l
51)
(l
48)
.
A
/
in Step 2. Not performing touch operations
[VOLUME]
(l
72)
Advertisement
Table of Contents
