Panasonic AG-AC30 Operating Instructions Manual page 107

Memory card camera-recorder
Hide thumbs Also See for AG-AC30:
Table of Contents

Advertisement

1
(When using USB HDD)
Connect the AC adaptor (supplied with USB HDD) to the USB HDD.
≥ If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD
by USB Cable (supplied with USB HDD).
2
Connect the AC adaptor to this unit.
≥ Use the AC adaptor to free you from worrying about the battery running down.
3
Turn on this unit, and press the THUMBNAIL button to switch to Playback
Mode.
4
Set [USB MODE SELECT] to [HOST].
MENU
: [OTHER FUNCTION] # [USB MODE SELECT] # [HOST]
5
Connect the external media device to the USB HOST terminal of this unit.
≥ If you use a USB HDD, connect to the USB HDD with the USB Cable supplied with the USB HDD.
≥ It may take several minutes until the connection is completed.
6
Touch the desired item.
[COPY ONCE]:
[SELECT COPY]:
[Playback from External Media]:
[Safe Removal]:
When the external media device is connected to other devices such as Blu-ray disc
recorder, a message prompting to format the external media device may display. All the
scenes and still pictures recorded on the external media device will be erased if
formatted. Do not format as important data will get erased and it will be impossible to
restore.
∫ Points to check before copying
≥ When using an external media device for the first time, or using an external media device
that has been used with other devices, first run [FORMAT MEDIA].
≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the external media
device.
(l
108)
≥ It may take longer to copy when there are many scenes.
≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still
pictures are canceled.
≥ The order in which the scenes were copied cannot be changed.
Before you delete the data on the SD card after copying is complete, be sure to play back
the external media device to check that they have been copied to correctly.
Copies all scenes and still pictures recorded with this unit
that have not been copied yet.
Allows you to select desired scenes/still pictures, and
then copy.
(l
109)
Plays back scenes and still pictures stored in an external
media device on this unit.
Allows you to safely remove this unit and an external
media device.
- 107 -
(l
108)
(l
110)
(l
110)

Advertisement

Table of Contents
loading

Table of Contents