Table of Contents
Advertisement
[ECONOMY (BATT)]
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
[ON]/[OFF]
≥ This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following
cases:
j PRE-REC is used
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
[ECONOMY (AC)]
When connected to AC adaptor about 15 minutes have passed without any operation, this unit
automatically turns off.
[ON]/[OFF]
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following
cases:
j PRE-REC is used
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
[USB MODE SELECT]
The unit's USB terminal to which a USB Cable will be connected can be switched.
Switch the terminal according to the shape of the USB Cable's plug you intend to connect to the
unit.
[HOST]:
For connecting to the USB HOST terminal (Type A) of the unit
[DEVICE]:
For connecting to the USB DEVICE terminal (Type Micro-B) of the unit
[INITIAL SET]
The menu settings is reset to the default.
[YES]:
[NO]:
* Settings for [CLOCK SET] and [TIME ZONE] will not be changed.
≥ Returning all settings to the default is not possible during Freeze Frame.
[NUMBER RESET]
Set the file number of the MOV/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001.
≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET].
(l
75, 126)
(l
75, 126)
This is for initializing all menus.
This is for not performing initialization.
*
(l
- 136 -
(l
(l
(l
71)
104)
103)
103)
Advertisement
Table of Contents
