Table of Contents
Advertisement
Level Shot Function
≥ Register "Level Shot Function" to a USER button.
This function detects the horizontal tilt of the unit, and automatically corrects it to the level position.
is displayed on the screen.
≥
≥ The icon changes when the tilt exceeds the correction range.
/
≥ When the tilt exceeds the correction range, move the unit to the position where
≥ This function is not available in the following cases:
j During Super Slow Recording
≥ The setting of this function cannot be changed during Freeze Frame.
≥ [LEVEL GAUGE] turns off if you set [LEVEL SHOT] to [ON]. Conversely, [LEVEL SHOT] turns off
if you set [LEVEL GAUGE] to [ON].
≥ The range that this icon can be displayed correctly the slope is about 45 o to the horizontal
direction.
≥ The image may move while zooming depending on the tilt of this unit.
≥ When recording horizontal images using a tripod, attach the unit on the tripod using [LEVEL
GAUGE], and set [LEVEL GAUGE] to [ON] again.
Flash band compensation
≥ Register "Flash band compensation" to a USER button.
≥ Switch to Manual Mode.
If you set this item to [ON], you can compensate for and reduce flash band, a phenomenon that
creates markedly different levels of luminance between the top and bottom of the image when
recording is performed in an environment where another camera is firing its flash.
≥ FBC appears on the screen.
≥ This function is not available in the following cases:
j When the frame rate in [REC FORMAT] is 29.97p or 23.98p
j When a setting in [SCENE MODE] is enabled
j When using [DIGITAL ZOOM]
j During Super Slow Recording
≥ The setting will be turned off in the following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j If you switch to Intelligent Auto Mode
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC.
≥ This function will fix the shutter speed to 1/60. The shutter speed cannot be adjusted.
PRE-REC
≥ Register "PRE-REC" to a USER button.
This allows the recording of an image and audio to start before you press the recording start/stop
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while
MOV/MP4 will be recorded from approximately 4 seconds before the operation.
When the tilt is corrected
When the tilt is above the correction range
(l
76)
(l
42)
(l
69)
(l
76)
(l
65)
(l
(l
(l
112)
(l
65)
- 75 -
(l
71)
65)
116)
is displayed.
(l
103)
Advertisement
Table of Contents
