Table of Contents
Advertisement
≥ To return to Auto White Balance Mode, press the WHITE BAL button or switch to Intelligent Auto
Mode using the iA/MANU switch.
≥ It is not possible to change the white balance mode in the following situations:
j When [SCENE MODE] is set to [Beach]/[Sunset]/[Fireworks]
j During Freeze Frame
To set ATW Lock
You can set ATW Lock by registering [ATW LOCK] to a USER button.
≥ Please refer to page
1
Set the White Balance mode to [ATW].
≥ Press the WHITE BAL button if a setting other than [ATW] is selected.
2
Press the USER button to which [ATW LOCK] is registered or touch the
applicable USER button icon.
≥ To cancel ATW Lock, press the USER button or touch the USER button icon again. Canceling
ATW Lock will return the White Balance mode back to [ATW].
≥ ATW Lock is not available except when the White Balance mode is set to [ATW].
≥ It will be canceled when the unit is turned off.
To finely adjust the White Balance
Setting the White Balance mode to [VAR] allows you to set a White Balance value between 2000K
and 15000K.
≥ Use the jog dial to change the settings.
≥ Switch to Manual Mode.
1
Set the White Balance mode to [VAR].
2
Push the jog dial.
3
Rotate the jog dial to adjust the color balance.
4
Push the jog dial to
(l
71)
65
for details about setting the USER button.
(l
42)
finish the adjustment
(l
(l
51)
.
- 52 -
112)
Advertisement
Table of Contents
