Table of Contents
Advertisement
[DF MODE]
Select the compensation mode for the time code.
Select the menu.
MENU
: [RECORD SETUP] # [DF MODE] # desired setting
[DF]:
[NDF]:
≥ This item will be set to [NDF] automatically in following cases:
j When the frame rate in [REC FORMAT] is 23.98p
j During the Interval Recording
[TCG]
Sets the way the time code will move.
Select the menu.
MENU
: [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]*:
[REC RUN]:
* If the frame rate in [REC FORMAT] is set to 23.98p, a slight time error may occur when switching
to Playback Mode.
≥ [FREE RUN] is automatically selected during PRE-REC.
≥ It is automatically set to [REC RUN] in following cases:
j During Super Slow Recording
j During the Interval Recording
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
Time code is compensated in accordance with the actual time. It is
mainly used for broadcasting such as TV programs.
It will not compensate the time code. (There will be a difference from
the actual time)
(l
125)
It will constantly move.
It will move only when recording.
(l
116)
(l
76)
(l
125)
(l
116)
(l
75, 126)
- 63 -
Advertisement
Table of Contents
