Parameter Adjustment - Vega PULS SR 68 Quick Setup Manual

Set parameters
VEGAPULS SR 68 • Modbus and Levelmaster protocol
5 Set up the sensor with the display and adjustment module
1
Fig. 10: Insertion of the display and adjustment module into the double chamber
housing
1 In the electronics compartment
2 In the connection compartment (with Ex-d-ia version not possible)
Note:
If you intend to retrofit the instrument with a display and adjustment
module for continuous measured value indication, a higher cover with
an inspection glass is required.
5.2

Parameter adjustment

1. Go via the display and adjustment module to the menu "Setup".
2. Select in the menu item "Medium" the medium of your applica-
tion, for example "Powder/Dust".
3. Select in the menu item "Application" the vessel, the application
and the vessel form, for example, silo.
4. Carry out the adjustment in the menu items "Min. adjustment" and
"Max. adjustment".
2
15