Set Up The Sensor With The Display And Adjustment Module; Insert Display And Adjustment Module - Vega PULS SR 68 Quick Setup Manual

5 Set up the sensor with the display and adjustment module

14
5 Set up the sensor with the display and
adjustment module
5.1

Insert display and adjustment module

The display and adjustment module can be inserted into the sensor
and removed again at any time. You can choose any one of four differ-
ent positions - each displaced by 90°. It is not necessary to interrupt
the power supply.
Proceed as follows:
1. Unscrew the housing cover
2. Place the display and adjustment module in the requested posi-
tion onto the electronics and turn to the right until it snaps in
3. Screw housing cover with inspection window tightly back on
Removal is carried out in reverse order.
The display and adjustment module is powered by the sensor, an ad-
ditional connection is not necessary.
Fig. 9: Installing the display and adjustment module in the electronics compart-
ment of the single chamber housing
VEGAPULS SR 68 • Modbus and Levelmaster protocol