Description Of The Alarms Menu; Description Of The Alarms History Menu - Carrier 30RQ Operation And Maintenance Instructions

4.3.12 - Description of the Alarms menu

This menu is used to display and reset up to 5 active alarms.
It also permits alarm reset. If no alarm is active this menu
is not accessible.
Alarms menu
Item Format Comments
0 [1] X ALArM X alarms are active
rESEt ALArM Reset of alarms is requested.
To reset all active alarms, continuously press the
Enter key. 'rESET ALArM' is then displayed.
Press the select key again: all alarms are reset.
1 [1] Alarm code text Current alarm code 1**
2 [1] Alarm code text Current alarm code 2**
3 [1] Alarm code text Current alarm code 3**
4 [1] Alarm code text Current alarm code 4**
5 [1] Alarm code text Current alarm code 5**
[1] This item is masked when nil
* See section "Alarm codes"
** Pressing the Enter key when alarm code is displayed causes the following
message to be scrolled:
"time of alarm" "date of alarm" "full CCN alarm message"
- "time of alarm": xxhmm
- "date": dd-mm
- "full CCN alarm message": up to 64 characters

4.3.13 - Description of the Alarms History menu

Alarms History menu
Item Format
0 [1] Alarm code text*
1 [1] Alarm code text*
2 [1] Alarm code text*
3 [1] Alarm code text*
4 [1] Alarm code text*
5 [1] Alarm code text*
6 [1] Alarm code text*
7 [1] Alarm code text*
8 [1] Alarm code text*
9 [1] Alarm code text*
10 [1] Alarm code text*
.... ....
19 [1] Alarm code text*
[1] This item is masked when nil
* See section "Alarm codes"
** Pressing the Enter key when alarm code is displayed causes the following
message to be scrolled:
"time of alarm" "date of alarm" "full CCN alarm message"
- "time of alarm": xxhmm
- "date": dd-mm
- "full CCN alarm message": up to 64 characters
4.3.14 - Description of the Runtime menu
RUNTIMES
RUNTIMES 1 RUNTIMES 2
[runtiMES 1] [runtiMES 2]
26
Comments
Alarm history code 1**
Alarm history code 2**
Alarm history code 3**
Alarm history code 4**
Alarm history code 5**
Alarm history code 6**
Alarm history code 7**
Alarm history code 8**
Alarm history code 9**
Alarm history code 10**
Alarm history code 11**
....
Alarm history code 20**
RUNTIMES 3 MAINTENANCE
[runtiMES 3] [MAintEnAnCE]
4.3.14.1 - Description of the Runtimes 1 menu
Runtimes menu [1]
Item Format Units
0 RuntiME 1 menu -
1 nnnn | M 10 | M100 hrs/10 or 100 Unit operating hours*
2 nnnn | M 10 | M100 hrs/10 or 100 Compressor A1 operating hours*
3 [1] nnnn | M 10 | M100 hrs/10 or 100 Compressor A2 operating hours*
4 [1] nnnn | M 10 | M100 hrs/10 or 100 Compressor A3 operating hours*
5 [1] nnnn | M 10 | M100 hrs/10 or 100 Compressor A4 operating hours*
6 nnnn | M 10 | M100 hrs/10 or 100 Compressor B1 operating hours*
7 nnnn | M 10 | M100 hrs/10 or 100 Compressor B2 operating hours*
8 [1] nnnn | M 10 | M100 hrs/10 or 100 Compressor B3 operating hours*
9 [1] nnnn | M 10 | M100 hrs/10 or 100 Compressor B4 operating hours*
10 - | M 10 | M100 -/10 or 100
11 - | M 10 | M100 -/10 or 100
12 [1] - | M 10 | M100 -/10 or 100
13 [1] - | M 10 | M100 -/10 or 100
14 [1] - | M 10 | M100 -/10 or 100
15 - | M 10 | M100 -/10 or 100
16 - | M 10 | M100 -/10 or 100
17 [1] - | M 10 | M100 -/10 or 100
18 [1] - | M 10 | M100 -/10 or 100
[1] This item is masked when not used
NOTES
* Certain values are divided by 10 or by 100, so that number of hours or
start-ups of less then 10 are displayed as 0.
When the value is divided by 10 or by 100 it is displayed in turn with "M 10" or
"M100".
4.3.14.2 - Description of Runtimes 2 menu
Runtimes menu [1]
Item Format Units
0 RuntiME 2 menu -
1 [1] nnnn | M 10 | M100 hrs/10 or 100
2 [1] nnnn | M 10 | M100 hrs/10 or 100
3 [1] nnnn | M 10 | M100 hrs/10 or 100
4 nnnn -
5 nnnn -
6 [1] nnnn | M 10 | M100 hrs/10 or 100
7 [1] nnnn | M 10 | M100 hrs/10 or 100
8 [1] nnnn | M 10 | M100 hrs/10 or 100
9 [1] nnnn | M 10 | M100 hrs/10 or 100
10 [1] nnnn | M 10 | M100 -/10 or 100
11 [1] nnnn | M 10 | M100 -/10 or 100
12 [1] nnnn | M 10 | M100 -/10 or 100
13 [1] nnnn | M 10 | M100 -/10 or 100
14 [1] nnnn | M 10 | M100 -/10 or 100
15 [1] nnnn | M 10 | M100 -/10 or 100
16 [1] nnnn | M 10 | M100 -/10 or 100
17 [1] nnnn | M 10 | M100 -/10 or 100
18 [1] nnnn | M 10 | M100 -/10 or 100
[1] This item is masked when not used
Comments
When selected this item authorises
return to the previous menu
Machine starts*
Compressor A1 starts*
Compressor A2 starts*
Compressor A3 starts*
Compressor A4 starts*
Compressor B1 starts*
Compressor B2 starts*
Compressor B3 starts*
Compressor B4 starts*
Comments
When selected this item
authorises return to the previous
menu
Pump 1 operating hours*
Pump 2 operating hours*
Heat reclaim condenser pump
operating hours
Compressor starts for compressor
with most starts during the last
hour
24 hours average number of
starts/hour, compressor
Compressor C1 operating hours
Compressor C2 operating hours
Compressor C3 operating hours
Compressor C4 operating hours
Compressor C1 starts
Compressor C2 starts
Compressor C3 starts
Compressor C4 starts
No. of defrost cycles, circuit A
No. of defrost cycles, circuit B
Free cooling refrigerant pump
operating hours, circuit A
Free cooling refrigerant pump
operating hours, circuit B
Free cooling refrigerant pump
operating hours, circuit C