Brother RJ-2030 User Manual page 78

Changing the Printer Settings
4 Media Sensor (Transmissive/Gap) (RJ-2140/2150 only)
Adjust the precision with which the transmissive/gap sensor detects the gaps (spacing) for die-cut labels
and the amount of light emitted by the sensor.
Settings can be specified when [Paper Types] is set to [Die-cut Label].
Note
Because the settings for [Media Sensor (Transmissive/Gap)] in the [Device settings] dialog box (See
Sensor Adjustment Tab on page 59) will have an effect, specify appropriate values.
Example of the settings:
Device settings
Paper Size Setup
Actual effect
5 Media Sensor (Reflective/Bar)
Adjust the precision with which the reflective/black mark sensor detects black marks and the amount of
light emitted by the sensor.
Settings can be specified when [Paper Types] is set to [Media With Marks].
Note
Because the settings for [Media Sensor (Reflective/Bar)] in the [Device settings] dialog box (See
Sensor Adjustment Tab on page 59) will have an effect, specify appropriate values.
Example of the settings:
Device settings
Paper Size Setup
Actual effect
6 OK
Saves the settings and returns to the previous dialog box.
7 Cancel
Cancels the settings and closes the dialog box. The settings will remain unchanged.
Setting EX1 Setting EX2
+2 -2
+2 +2
4 0
Setting EX1 Setting EX2
+2 -2
+2 +2
4 0
3
69