Brother RJ-2030 User Manual page 38

Setting Up the Printer
WPS (Wi-Fi Protected Setup™)
If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly.
1
First, confirm that your Wi-Fi access point/router has the WPS symbol.
2
Place your printer within the range of your Wi-Fi access point/router. The range may differ depending on
your environment. See the instructions provided with your Wi-Fi access point/router.
3
Press the WPS button on your Wi-Fi access point/router.
4
On your printer, press the [Menu], [ ] button to select the [WLAN] menu, and then press the [OK] button.
5
Press the [ ] button to select the [WPS] menu, and then press the [OK] button.
6
Select [Start], and then press the [OK] button.
When the connection is established, the WLAN icon appears on your printer's LCD. Computers and mobile
devices that are on the same network as the printer will have access to the printer.
Note
Your printer will try to connect using WPS for two minutes. If the [Menu] button is pressed during that time,
the printer will continue trying to connect for an additional two minutes.
1
1
29