Renault KANGOO Driver's Handbook Manual page 115

Hide thumbs Also See for KANGOO:
Table of Contents

Advertisement

TYRE PRESSURE LOSS WARNING
2
SYSTEM B (cntd.)
Resetting procedure
With the ignition on, depending on the
vehicle:
– repeatedly press one of the buttons 3
or 4 to select the "TYRE PRESSURE
ACQUISITION" function on the dis-
play 2;
– press and hold (around 3 seconds)
button 3 or 4 to start initialisation.
(7/9)
The display of the message "TP
ACQUISTION LAUNCHED" for
around five seconds indicates that
the reset request for the tyre pres-
sure reference value has been taken
3
into account.
Or
– repeatedly press the button 3 to
select the "SEt PP" function on the
display 2;
4
– press and hold (around 3 seconds)
the button 3 to start initialisation. The
flashing, lasting around five seconds,
followed by a constant display of the
message "SEt PP" indicates that the
reset request for the tyre pressure
reference value has been taken into
account.
Reinitialisation is carried out after a few
minutes' driving.
Note:
The standard tyre pressure cannot be
less than that recommended and indi-
cated on the door frame.
2.23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents