Renault TWINGO Driver's Handbook Manual page 69

HEADLIGHT BEAM ADJUSTMENT
When driving on the left in a left-hand
drive vehicle (or vice versa), you must
adjust your lights temporarily for the
duration of your trip.
(2/2)
B
Temporary adjustment
Open the bonnet (please refer to the in-
formation on the "Bonnet" in Section 4)
and slide it sideways to access the
screw 1 and marking B.
Note: Take care not to scratch the vehi-
cle paintwork.
For each headlight, using a screw-
driver, turn the screw 1 by a quarter
turn towards the - symbol to lower the
beams.
Return to the starting point once your
trip is over: turn the screw 1 by a quar-
ter turn towards the + symbol to raise
the beams.
Once the adjustment has been done,
make sure the bonnet is repositioned
and closed properly.
1
For your safety, do not
remove the bonnet holding
straps. Risk of the bonnet
falling on the road surface.
1.63