Connecting With External Speaker; Basic Operation - Denver MTW-728 TWIN Instruction Manual

Connecting with external speaker

AV IN/OUT
VIDEO IN
TV
Centre speaker
Left front speaker
SUBWOFER
Left rear speaker
Note There is no 5.1 channel in the unit,however,after connecting to APM it
is available to output audio in 5.1 channel.
DC IN 9V
DC OUT
AV CABLE
(Not Supplied)
AUDIO IN
AMPLIFIRE
Right front speaker
Right rear speaker
8

Basic Operation

Playing disc of DVD,MPE4,SVCD,VCD,CD,MP3
DVD VCD
MPEG4
SVCD
1.Connect the unit to the power;
2.Open the unit and adjust the monitor to the best position for viewing.
3.Turn on the unit by sliding the ON/OFF switch to ON,the source menu will be displayed
on the screen:
Press[ ]to enter DVD mode or Media mode and press ENTER to confirm.
when selecting media, ensure to insert USB or SD/MMC card properly.
4.Open the disc door by sliding OPEN knob to left and insert a disc into the door with
the label side facing up.
5.Close the disc door. The unit will load the disc and start playing.
6.Press[ ] once to stop playback; then press[
where you stopped; press[ ] twice to stop playback completely.
7.when the playing is finished, please turn off the power by sliding
ON/OFF switch to OFF.
Pause during playback
During playback,press[ ] to pause;press it
again to resume playback.
DVD MPEG4 VCD
SVCD
When at pause,stop,or no disc,in about 3 minutes the
unit will be protected;press any button to exit.
Note
For some DVD disc with Title or chaptermenu,press MENU
button to enter menu page,and use direction button to
select,Press ENTER to confirm.
Play DVD disc with title or chapter menu
CD MP3
DVD
MEDIA
] to resume playback from the point
CD MP3
Play/pause
Title
Cursor button
ENTER
9
Menu