Side Stand; Wheel Removal - Honda CB Hornet 2016 Owner's Manual

SIDE STAND

Refer to the Safety Precautions on page 42.
Check the side stand spring (1) for damage
and loss of tension, and the side stand
assembly for freedom of movement.
If the side stand is squeaky or stiff, clean
the pivot area and lubricate the pivot bolt
with clean engine oil.
(1)
(1) Side stand spring
Honda Motorcycle & Scooter India Pvt. Ltd.
¼lkbM LVS U M fLiz a x ½

WHEEL REMOVAL

Refer to the Safety Precautions on page 42.
Front Wheel Removal
1. Place the vehicle on its center stand.
2. Raise the front wheel off the ground
by placing a support block under the
engine.
3. Remove the front axle nut (1).
4. Loosen the axle pinch bolt (2)
5. Remove the front axle shaft (3) and the
wheel.
Do not depress the brake lever when
the wheel is off the vehicle. The caliper
piston will be forced out of the cylinder
with subsequent loss of brake fluid. If this
occurs, servicing of the brake system will
be necessary. Visit your Honda dealer for
this service.
61