Stoplight Switch Adjustment - Honda CB Hornet 2016 Owner's Manual

MAIN FUSE:
The main fuse (1) is located behind the left
side cover.
The specified fuse is : 20A
1. Remove the left side cover (page 33).
2. Disconnect the wire connector (2) of
the starter magnetic switch (3).
3. Pull out the fuse. If fuse is blown,
install a new fuse. Spare main fuse (4)
is attached below the starter magnetic
switch.
4. Install the left side cover and the seat.
(1)
(3)
(1) Main fuse ¼es u ¶;w t ½
(2) Wire connector ¼ok;j dus D Vj½
(3) Starter magnetic switch
(4) Spare main fuse
70
(2)
(4)
¼LVkVZ j eS x us f Vd fLop½
¼Lis ; j es u ¶;w t ½
STOPLIGHT SWITCH
ADJUSTMENT
Refer to the Safety Precautions on page 42.
Check the operation of the stoplight switch
(1) at the right side behind the engine from
time to time.
Adjustment is done by turning the adjusting
nut (2). Turn the nut in the direction (A) if
the switch operates too late and in direction
(B) if the switch operates too soon.
(1)
(A)
(1) Stoplight switch
¼LVkW i ykbV fLop½
(2) Adjusting nut
¼,MtfLVa x uV½
Honda Motorcycle & Scooter India Pvt. Ltd.
(2)
(B)