Honda CB Hornet 2016 Owner's Manual page 70

(2) (3)
(1) Front axle nut ¼Ýa V ,Dly uV½
(2) Axle pinch bolt ¼,Dly fiUp cks Y V½
(3) Front axle shaft ¼Ýa V ,Dly "kkW ¶ V½
Installation Notes:
• Position the wheel between the fork
legs and insert the front axle from the
right side, through the right fork leg
and wheel hub.
• Tighten the front axle nut to the
specified torque.
Front axle nut torque:
59 N·m (6.0 kgf·m , 43 lbf·ft)
62
•
•
(1)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tighten the axle pinch bolt on the left
fork leg to the specified torque.
Axle pinch bolt torque:
22 N·m (2.2 kgf·m , 16 lbf·ft)
After installing the wheel, apply the
brake several times and then check if
the wheel rotates freely. Recheck the
wheel if the brake drags or if the wheel
does not rotate freely.
Honda Motorcycle & Scooter India Pvt. Ltd.