Spark Plug - Honda CB Hornet 2016 Owner's Manual

SPARK PLUG

Refer to the Safety Precautions on page 42.
Recommended plug:
Standard:
CPR8EA - 9 (NGK)
NOTICE
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
1. Disconnect the spark plug cap (1) from
the spark plug.
2. Clean any dirt from around the spark
plug base.
Remove the spark plug using the spark
plug wrench (2) furnished in the tool kit.
3. Inspect the
porcelain for
carbon fouling. If the erosion or deposit
is heavy, replace the plug. Clean a
wetfouled plug with a plug cleaner,
otherwise use a wire brush.
Honda Motorcycle & Scooter India Pvt. Ltd.
electrodes and center
deposits, erosion
(1) Spark plug cap
(2) Spark Plug wrench
4. Check the
using a
If adjustment
bend the side electrode (4) carefully.
The gap should be:
or
0.8-0.9 mm(0.03-0.04 in)
5. With the plug washer attached, the
spark plug in by hand to prevent
cross-threading.
(1)
¼LikdZ Iyx dS i ½
¼LikdZ Iyx js a p ½
spark plug gap
wire-type feeler
is necessary,
(2)
(3)
gauge.
51