Various Ways Of Recording; Two Ways Of Connection To A Sound Source - Sony MZ-R30 Operating Instructions Manual

MZ-R30 Operating Instructions
To go backward or forward quickly without listening, press
1)
Once you open the lid, the point to start play will change to the beginning of the first track.
2)
If the play does not start
Make sure the recorder is not locked (
Locking the controls )

Various ways of recording

Two ways of connection to a sound source

The input jack of this recorder works as both digital and analog input jack. Connect the recorder to a CD player or
a cassette recorder using either digital input or analog input. To record, see
using digital input, and
Difference (connection)
Connectable source
Usable cord
Signal from the source
Recorded track numbers
http://www.birst.co.uk/engineering/mzr30/mz-r30e.htm (7 of 32) [16/12/2002 22:59:44]
Recording an MD right away!
Input Digital Input
Equipment with an optical digital output jack
Digital cable (with an optical or an optical or an
optical-mini plug)
Digital
Marked (copied) automatically
The recorder automatically switches to play the stereo or
monaural sound according to the recorded sound
to record using analog input.
at the same position as the source.
when the recorder is paused while recording.
and keep pressing or
Recording with digital input
Line (analog)
Input
Equipment with an
analog (line)
output jack
Line cable (with 2
phono plugs or a
stereo-mini plug)
Analog
Even when a
digital source
(such as a CD) is
connected, the
signal sent to the
recorder is analog.
Marked
You can erase
unnecessary
marks after
recording
a track
.
to record
after more
than 2
seconds of
silence
when the
recorder is
paused
while
recording.
(Erasing
mark)