Recording From A Microphone - Sony MZ-R30 Operating Instructions Manual

MZ-R30 Operating Instructions
1. Slide SYNCHRO REC to ON. "SYNC" appears in the display.
2. Slide REC to the right while pressing its button. The recorder stands by for recording. Play the source sound.
The recorder starts recording when it receives the playing sound.
To stop recording, press
When there is no sound from the layer more than 3 seconds during synchro-recording, the recorder stands by for
recording automatically. When the sound comes from the player again, the recorder starts synchro-recording
again.
Notes
Do not switch SYNCHRO REC after step 2. Recording may not be made properly.
If you record in monaural, do steps 1 and 2 in
of an MD before doing the synchro-recording steps.

Recording from a microphone

Connect a stereo microphone ECM-909A, ECM-MS907, ECM-717, etc., (not supplied) to the MIC(PLUG IN POWER)
jack.
http://www.birst.co.uk/engineering/mzr30/mz-r30e.htm (9 of 32) [16/12/2002 22:59:45]
.
Recording in monaural for double the normal recording time
1. Select the input level with MIC SENS (on the bottom of
the recorder). Usually, set it to HIGH. When you record
loud sound such as a live concert, set it to LOW.
2. Insert a recordable MD and start recording.
Slide REC to the right while pressing its button.
"REC" lights up and recording starts. For details, see
Recording an MD right
Note
To record from a microphone, you must first disconnect any
digital source. If connected, the recorder will not switch to
microphone input.
away!.