Recording With Digital Input; To Start/Stop Recording With The Player (Synchro-Recording) - Sony MZ-R30 Operating Instructions Manual

Hide thumbs Also See for MZ-R30:
Table of Contents

Advertisement

MZ-R30 Operating Instructions
Recorded sound level
Note
Track marks may be copied incorrectly:
when you record from some CD players or multi disc players using digital input.
when the source is in shuffle or program play mode while recording using digital input. In this case, play the
source in normal play mode.

Recording with digital input

This unit has a built-in sampling rate converter so that you can record programs from digital equipment using
other sampling rates, such as a BS tuner or a DAT deck.
Insert a recordable MD and start recording.
To record, see
Recording an MD right
then start recording.
LINE IN (OPTICAL) jack is for both digital and analog input.
The recorder automatically recognizes the line cable and switches to digital or analog input.
Notes
You can make a digital recording only from an optical type output.
Some portable CD players with the ESP* system cannot send out digital signals when it is activated. In this
case, release the ESP system.
*Electronic Shock Protection

To start/stop recording with the player (Synchro-recording)

You can easily make digital recordings of a digital source on an MD. Before synchro-recording, make connections
to the digital source with a digital cable and the power source, and insert a recordable MD.
http://www.birst.co.uk/engineering/mzr30/mz-r30e.htm (8 of 32) [16/12/2002 22:59:45]
Same as the source
away!. To record from a portable CD player, set the CD player to pause and
Adjusted
automatically. Can
also be adjusted
manually
(Adjusting the
recording
level)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents