Preferences Screen - Monitor Settings Tab Details - Sun Nuclear Radon 1028 User Manual

5 Edit the Inspection Company and Radon Monitor information, as needed. For
details about the screen options, see Preferences Screen - Monitor Settings
Tab Details on page 39.
6 Set the date, time, pin number and Radon units. If the Set Monitor Time
checkbox is selected, the software automatically updates the time and date
to the computer's system clock.
7 Click the Send Data to Monitor button. The changed parameters are stored
in the radon monitor's internal memory.

Preferences Screen - Monitor Settings Tab Details

The Monitor Settings tab is used to enter details that will be transferred to the
radon monitor's memory.
Group
Retrieve Data N/A
from Monitor
button
Item
When Start Test = 5 is displayed on the monitor, click
this button to retrieve the parameters and test results
stored in the radon monitor.
Note that radon monitor data cannot be updated if
there is test data in memory.
Figure 24. Monitor Settings Tab Details
Description
39