Computer Operation; About The Software; Set Up Software; Prerequisites - Sun Nuclear Radon 1028 User Manual

About the Software

The Radon Monitor uses a Windows program called "1028/1029 Radon Monitor."
The software can be used to:
• Enter and download setup parameters into the radon monitor
• Upload report data from the radon monitor into the computer
• Add customer information and test conditions to the report
• Print reports on any available printer

Set Up Software

Prerequisites

• Ensure the computer meets the system requirements in Recommended
System Requirements on page 46.
• Administrative rights may be required to install and use the software, and to
set up communication between the computer and the Radon Monitor.

Install Software

Note: USB drivers are installed automatically during this procedure.
1 Download the 1028/1029 Radon Monitor software from the Radon Support
website, https://support.sunnuclear.com/radon/
or laptop.
2 Right-click the software executable file Setup.exe and select Run as
Administrator, then follow the on-screen instructions to install the software.
Accept all default folders and file locations.
3 When the 'Device Driver Installation Wizard' is displayed, click Next. The
device drivers are installed and then the driver status ('Ready to use') is
displayed.
4 Click Finish to close the window. The 'Installation Completed' window is
displayed.
5 Click Finish to close the 'Installation Completed' window. The Radon Monitor
icon appears on the desktop.

Computer Operation

and save it to your computer
26