3
Specify the Destination
Press [Address Book] → select destination → press [OK].
Press [Address Book].
Select the destinations → press [OK].
For more information on storing the destination
in the address book, see p. 33 on this manual.
You can specify the destination using the one-
touch buttons or frequently used settings. Also,
if you want to send to a new destination not
yet stored, press [New Destination] → enter the
destination.
4
Start Sending
After selecting the settings, press
Press
.
If the following screen is displayed, follow the
instructions on the screen → press
the original sheet by sheet. After all originals are
scanned, press [Start Sending].
When scanning is complete, remove your originals.
If a login service such as Department ID
Management or SSO-H has been set, press
(Log In/Out) to log out.
.
to scan
32