Initiate Installer Settings - TOTALINE EZ3 Setting Manual

INITIATE INSTALLER SETTINGS

Off Mode
Selected
DEFINITION
To invoke the "System Settings Screen" the end
user must first navigate to the "Mode Screen"
and then ensure that the Mode is set to Off and
then go to the "Fan Screen" and press and hold
the Fan Button for 5-seconds. Once this
sequence is completed, the "System Settings
Screen" screen will be displayed allowing the
end user (or installer) to make changes to
advanced settings on the thermostat.
DEPENDENCIES
None
FUNCTION
Once the "System Settings Screen" is
displayed, the end user has the option to
"Up Swipe" and "Down Swipe" to navigate
through multiple advanced settings
options for the thermostat. The yellow
Row Indicator at the right side of these
screens indicates the location of the list of
advanced settings options and can also be
pushed upward or pulled downward to
navigate through the settings options.
Press and Hold
5 Seconds
4