Siemens optiPoint 410 Administrator's Manual page 68

Alphabetical Reference
Configuration Filename
•
•
•
•
•
Æ page 58
Date
•
•
•
Æ page 38
Date Format
•
•
Æ page 37
Daylight Saving
•
•
Æ page 37
Default Route
•
•
•
•
•
Æ page 68
68
Specify the name of the file containing the configuration data of the
optiPoint 410 enthält.
The file must exist in a defined directory on the Æ FTP server
(Æ Download Server Address, Æ FTP Path).
Valid values: 1 ... 24 characters and corresponding to the DOS conven-
tions (8.3).
Standard name Æ page 95.
Text editor in the optiPoint 410 Æ page 93.
Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
Define the date format here and enter the current date.
Date/Time editor in the optiPoint 410 Æ page 94.
Æ page 60
Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
Define the date format here.
Æ page 60
Manual definition is necessary only if this information is not transmitted
automatically (e.g., by the Æ PBX or by a Æ DHCP server).
Activate this switch if a time shift should be considered in relation to
the summer period.
Æ page 60
Enter the Æ IP address that was assigned to your Æ PBX if no
Æ DHCP server assigns this value dynamically (Æ DHCP IP Assign-
ment).
If the value was assigned dynamically, it can only be read.
A restart is necessary after the change.
Standard value Æ page 95.
IP editor in the optiPoint 410 Æ page 94.
Æ page 16 Æ page 58
Description of functions