Siemens optiPoint 410 Administrator's Manual page 78

Alphabetical Reference
National Dial Prefix
•
Æ page 31
Number Field Format Information
•
PBX Address
•
•
Æ page 26
PC Port Settings
•
PING Test
•
•
Æ page 42
QoS L2/L3
•
•
•
•
Æ page 22
RAM Test
•
•
Æ page 41
Registration Time to Live
•
Æ page 54
78
Canonical format Æ page 83.
Æ page 57
Further description ... (DSM)
Enter the Æ IP address of the Æ PBX which operates with the
optiPoint 410.
IP editor in optiPoint 410 Æ page 93.
Æ page 56
"LAN Port Settings" Æ page 75
Conduct a Æ PING test to check whether a server or another terminal
device (e.g., the optiPoint 410) can be reached in the network.
For this, enter an Æ IP address as the test target, the connection to
which you wish to test.
Æ page 61
The settings relate to the Æ Layer 2 and Æ Layer 3 areas of the
Æ QoS, that regulate the prioritisation of the transferred data.
For Layer 2, the Æ VLAN Discovery Mode and the Æ Virtual LAN ID can
be changed. For Layer 3, the Æ L2/L3 Voice/Signalling can be changed.
The activation of Layer 2 and / or Layer 3 support is meaningful only if
the used Æ Switch can interpret this information (e.g., "Layer 2
Switch").
Standard value Æ page 95.
Æ page 59
Here you can test the Æ RAM memory of your optiPoint 410.
The results are displayed after the test is over.
Æ page 61
Further description ... (entry)
Description of functions