Installing The Sim Card And Battery - Amplicomms PowerTel M7000 Quick Start Manual

Installing the SIM card and battery

• Switch the phone off.
• Remove the battery cover by gras-
ping the small recess in the hou-
sing (near the speaker) and lift the
rear housing cover.
• If there is already a battery inside,
remove it.
• Slide the SIM card with the golden
contacts facing down in the moul-
ded SIM card holder. The SIM card
must be located under the metal
retaining bar to be in the correct
position.
• Insert the battery. The golden contacts on the battery
must face towards the bottom right. Press lightly on
the top end of the battery until it snaps into place.
• Locate the battery cover on the back of the phone and
(See M7000 user guide for costs and hours of operation)
Q
Helpline 0844 800 6503
S
UICK TART
G
UIDE
Battery
contacts
5