Setup Menu - Hach PAT700 User Manual

Icon Function
Diagnostics
Data review
Sign on or off If password security is enabled, users must use a password to make operation

Setup menu

Table 12 shows the options on the setup menu.
Icon Description
TOC Change the settings for the TOC operating mode. Refer to
on page 27.
System Change the system settings for the analyzer (instrument name, language, time, measurement
units, sounds, network and backlight). Refer to
Alarms Change the settings for the digital output alarms. Refer to
on page 31.
Analogs Change the settings for the analog outputs. Refer to
Printer Change the printer settings. Refer to
Security Enable or disable security, data logging and/or encryption of exported data. Set password
expiration and auto logout. Add, change or delete user accounts. Show the audit trail. Refer to
Security configuration
Bottles Change the auto acceptance and test completion criteria for bottle mode operations. Refer to
Bottle mode configuration
Password Change the password of the user that is logged in. This icon is only enabled when security is
enabled.
CIP Set the conductivity threshold and CIP timeout value. Refer to
options on page 36.
AutoSampler Enter the autosampler model. Refer to
Factory Shows the factory settings which can only be changed by factory authorized users. Push the X
icon to show the factory settings (e.g., model number, serial number and factory calibration date)
or copy the oxidation buffers (3 maximum) to a USB flash drive.
22 English
Table 11 Sliding toolbar options (continued)
Description
General—Monitor lamp use and test, change or replace lamps.
Diagnostic tests—Test the pump, 4–20 mA output, digital I/O, plumbing, RS232, RFID,
fan and touchscreen calibration.
Calibration—See the calibration dates.
Review, print or export data.
changes. Log off to prevent access to system changes.
Note: If a user is signed on remotely, the user cannot be signed off locally. If a user is signed on
locally, the user cannot be signed off by a remote user.
Table 12 Setup menu options
on page 34.
on page 37.
TOC operating mode configuration
System configuration
Configure the digital output alarms
Configure the analog outputs
Configure the printer settings
Configure the auto sampler
on page 29.
on page 33.
on page 33.
Configure clean-in-place (CIP)
on page 36.