Custom Panel Preparation - Fisher & Paykel RS90A1 Planning Manual

CUSTOM PANEL PREPARATIONS
900mm ActiveSmart™ Slide-in Refrigerator
Model no:
RS90A1

Custom Panel Preparation

Dimensions are shown in Metric (mm).
Dimensions apply for the preparation and installation of custom panels.
Custom panels are for non-Ice & Water models only.
For the second panel mirror and repeat dimensions using inner bottom corner
as the reference point.
Handles
Ensure handle is mounted 65 mm from inner edge of panel to the centre – this
will avoid interference with brackets. (Refer red dash line).
Dwg & Dxf Files
Dwg and Dxf files of the panel preparation are available within the download
folder for this product and can be found on
http://thekitchentools.fisherpaykel.com.
DATE: 20.04.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32 '') . Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
TOP PANEL – REAR VIEW