Cavity Preparation - Fisher & Paykel RS90A1 Planning Manual

C
A
B
ISO VIEW OF CAVITY
REAR OF CAVITY

CAVITY PREPARATION

900mm ActiveSmart™ Slide-in Refrigerator
Model no:
RS90AU1 (with Stainless Steel Door panels PART NO. RD90U)
RS90A1 (with Stainless Steel Door panels PART NO. RD90)
RS90A1
Cavity Dimensions
a Overall height of cavity
B Overall width of cavity
when adjoining cabinetry can share 4mm door gap
when adjoining cabinetry cannot share 4mm door gap
c Overall depth of cavity
Specifications
Electrical
Supply
Service
Specifications
Electrical
Supply
Service
Plumbing
Supply
1/2" BSP threaded water connection, 6.35mm PEX
Pressure
Maximum 120 psi (827 kPa) @ 20°C
NOTE: Recommended that the electrical & water connection be located in an
adjacent cabinet to either side of the fridge or above the fridge cavity.
Do not locate water or electricity in this area, keep clear of connections.
! CAUTION: Central area can only fit water outlet and electrical plug if they are
placed within a recessed cavity.
* In this location the water tap needs to be recessed into the wall, the recess
must allow for an 80mm bend radius for the water tube.
DATE: 20.04.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32 '') . Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
mm
1800
900
904
650
RS90A1
230 VAC, 50 Hz
10 amp circuit
RS90AU1
230 VAC, 50 Hz
10 amp circuit
tubing
Minimum 22 psi (150 kPa)