Final Installation; Signal Strength; Network Connection - NCR RealPOS 7197 Wi-Fi Configuration Manual

Hide thumbs Also See for RealPOS 7197:

Table of Contents

Configuring a Wi-Fi Printer

Final Installation

When the printer is installed in its final operating location verify the network signal

strength is -65 db or higher (toward positive numbers) after connecting the printer. The

signal strength can be found on the diagnostic form.

If the printer does not connect to the network the IP Address indicated on the

diagnostic form will be empty (0.0.0.0). The printer should beep once when it is

powered up, indicating it is connected to the network. When connected it shows an IP

address.

Table of Contents

Show Quick Links

Table of Contents