Checking The Installation - NCR 7197 Owner's Manual

Chapter 2: Setting Up and Using the Printer

Checking the Installation

You need to verify that the device drivers were installed correctly:
Windows 98:
1. Open the Device Manager window, as you did in "Checking for USB Support."
2. Scroll down to "Universal serial bus controllers."
The following devices should be displayed:
•
•
3. Scroll back up to "Ports."
You should see a COM number and port description for the NCR printer.
If the devices are missing or are not listed correctly, the installation wasn't successful.
You will need to reinstall the drivers.
30
NCR 7197 Printer
NCR 7197 Serial Ports [Port#] (where the # is the location of the printer)
February 2002
7197 Owner's Guide