Timer Button; Down Button - Prokonian SP4320-HE-FG Instruction Manual

OPERATING INSTRUCTIONS

Timer Button:

Timer Setting
• Timer can be adjusted when heater is ON. It can adjusted from 0 hour (OFF) to 9 hours with 0.5 hour interval.
• When TIMER is activated, the symbol will be displayed.
• When TIMER digital is 0 H, TIMER function is invalided. The TIMER symbol will automatically disappear
Clock Setting
• For clock setting, hold the TIMER key for 5s, hour display will flashing. Push UP "+" or DOWN "-" key, Hours
setting can be adjusted. Touch the TIMER key once more, minute display will flashing. Minutes setting can be
adjusted as the same way as hours setting.
• When clock is at the setting mode, hold UP ("+") and DOWN ("-") keys together to select 12H or 24H mode. The
unit default setting is 24H. The AM or PM symbol will automatically displayed when the 12H mode was selected.
• Press the timer key can exit the setting or it will automatically exit after 8s without any further operation.
Heater Button:
Temperature Setting
• HEATER key is used to control ON/OFF of the heater. Push UP ("+") or DOWN ("-") key to to scroll through the
pre-set temperature range from 59°F (15°C) to 86°F (30°C), ON & OF (OFF). Heater will turned ON accordingly to
the set temperature. When the ambient temperature is higher than the set temperature, heater will
automatically turned OFF.
• When the temperature is set at "ON", heater will be working continuously.
• When HEATER is activated, the heater & temperature symbol will displayed.
• When the heater is ON, hold the HEATER key for 3 sec; this allow the temperature unit change from °C to °F or
°F to °C. The unit default setting is °F.
UP Button ;
• Control the setting of flame brightness, flame color, mood light brightness, mood light color, timer, clock and temperture .
Child Lock
Activate Child Lock
When the unit is ON, holding the POWER button for 10 seconds to activate the Child Lock fuction. E3 will be displayed and
"Beep Sound" for 3 times that indicate the Child Lock fuction acticate. All function keys are lcoked. When pressing any
button, E3 will be displayed that indicate the Child Lock fuction acticate.
Inactivate Child Lock
To inactivate the Child Lock function, holding the POWER button for 10 seconds.
Remote Control
Functions are same as the touch control except Child Lock, Change the temperature unit, Clock Setting and Change between
12H and 24H.

Down Button:

12