Power Button - Prokonian SP4320-HE-FG Instruction Manual

OPERATING INSTRUCTIONS

Power Button

• Pressing the power button will turn ON or OFF the unit.
• When the unit is in ON mode, touch control panel light will fully light up for 8 sec and then shut down if without
any others operation including remote control.
• When the unit is in OFF mode, the POWER symbol LED will Semi-bright. When power OFF, unit will be stopped,
if heater is working before power OFF the unit, fan will have 20 seconds delay to ensure heat will not be trapped
inside the unit.
Flame Button
• Press the flame button to cycle through the setting as:
Flame Brightness (FL), Flame Color (FC).
Flame Brightness Setting
• Press "Flame" key until FL0 / FL1 / FL2 / FL3 / FL4 / FL5 shown on the display, and then press "+" key or "-" key
to adjust the flame brightness from level 0 to level 5.
Flame Color Setting
• Press "Flame" key until FC1 / FC2 / FC3 / FC4 / FC5 /FC6 shown on the display, and then press "+" key or "-" key
to adjust the flame color.
Setting
FC1
FC2
FC3
° F
AM
° C
PM
Color
Yellow
Blue
Yellow + Red
Setting
Color
FC4
Yellow + Blue + Red
FC5
Yellow + Blue
FC6
Auto Change
11